/docs/getting-started/configuration/Recent content in Configuration on NoCo MeshHugoen-usSat, 24 Jan 2026 19:18:03 -0700/docs/getting-started/configuration/app_settings/Sat, 24 Jan 2026 17:04:22 -0700/docs/getting-started/configuration/app_settings/<table> <thead> <tr> <th>Setting</th> <th>Default Value</th> <th>Notes</th> </tr> </thead> <tbody> <tr> <td>Language</td> <td>System Default</td> <td>Not explicitly set</td> </tr> <tr> <td>Provide phone location to mesh</td> <td>Enabled</td> <td>Disable if you are paranoid</td> </tr> <tr> <td>Show Introduction</td> <td>N/A</td> <td>Re-runs the introduction from when you first run the app</td> </tr> <tr> <td>Export/Import Configuration</td> <td>N/A</td> <td>Save and load configuration files</td> </tr> <tr> <td>Export Data/Rangetest</td> <td>N/A</td> <td>Export app and rangetest data</td> </tr> <tr> <td>Debug Panel</td> <td>N/A</td> <td>Opens a debug panel, useful if you need verbose information</td> </tr> <tr> <td>Device DB Cache Limit</td> <td>3</td> <td>The default is probably fine unless you have many, MANY nodes</td> </tr> <tr> <td>System Settings</td> <td>N/A</td> <td>Opens system app settings</td> </tr> </tbody> </table>